Established since 1993 and providing engineering services and process support in medical devices and pharmaceutical manufacturing operation. We understood fully the requirement of cGMP and could also provide validation protocols and reports to support Installation Qualification requirements. See examples below.

Controllers for timed or sequence operations. Applications -
1. Dispensing of liquid for filling, bonding or coating process. (Plastic Box - 230 Vac, Analogue timer - $550)
2. Pressing, Drilling or cutting - Clamp cylinder out, Lock cylinder out, Press Extend, Hold Time, Press Retract, Lock cylinder Retract and Clamp Return.
Design control logic/circuit for automated process. Conveying and handling of food powder and plastic pellets. Sheet metal cutting and assembly processes. Examples:
 1. Rotating arm for 'pick and place' component from indexing table onto conveyor. Assembly and pressing operation on indexing table. Two hand safety start
2. On-Demand/Sequential loading of material using pneumatic and screw conveying
Other automated processes X-Y Axis Pick and Place application
Semi-automated assembly operations using Jigs & Fixture
Feeding of rolled metal sheet for clamping, cutting, releasing, counting, stacking and push off
Leak and flow Tester
Applications:
Suitable for measuring medical devices, test for clog or leak, determining flow through restriction, orifice, cannula

Measure air flow of up to 0.5 sccm of air (equivalent of 30 cc/min water flow).
Measure Pressure decay up to 0.01mmHg accurate. User configures set up - flow or pressure decay test. Store up to 99 test programs, each with user defined acceptance criteria. Allow user  to set up test sequence such as leak test 1, follow by leak teak test 2 and then flow test using the any of the set up. Each test may be separately set to test different ports. Comes with discrete input and output contacts for triggering external controls. Self test before start up to ensure tester is accurate and remain in calibrated state. RS232 communicating port for outputting test data.

For enquiry email to unixon@bizsingapore.com

 

 Built in Features:
  • Serial Port
  • 99 Programs
  • Simple Setup
  • 512 Character Display
  • RS-232 port
  • Software calibration
  • Selectable engineering units
  • Pass / reject indicators
  • Remote start input
  • Key lockout
  • I/O Port
  • Vacuum generator
  • Down stream sensor
  • Electronic regulator
  • Fast fill function
  • PLC interface/Dry contacts to trigger external control
  • Multi channel concurrent testing
  • Multi channel sequential testing
DEVELOPING ADVANCED MICROSOFT EXCEL  MACROS TO IMPROVE PRODUCTIVITY Routine manual and time consuming tasks such as automatic calculation of stock item prices, consolidating inventory, scheduling and reminder of event or activities due for execution (GMP compliant, electronic signature and record compliant with Audit Trail of changes), calculating pay based on clocked hour with different pay scheme or structure can be done in few seconds by a click of a mouse. See examples and training